VAN COMPASS SPRINTER 907 AWD VS30 - STAGE 6.3 PACKAGE 2"/5,1 cm LIFT - FALCON 3.3 SHOCKS, FRONT SUMO, STRIKER 4X4 KIT

€9.100,00
Article number: 7222-LM
Delivery time: 0-2 weeks

VAN COMPASS SPRINTER 907 AWD VS30 - STAGE 6.3 PACKAGE 2"/5,1 cm LIFT - FALCON 3.3 SHOCKS, FRONT SUMO, STRIKER 4X4 KIT

This product is to chose for the Sprinter 907 4Matic with 9G automatic transmission!

The STAGE 6.3 kit combines our STAGE 2.3 suspension package with Striker 4x4 Sprinter 2.0” suspension lift system. The kit improves the ride quality of the van, provides clearance for larger tires and offers additional ground clearance. 

The Striker system retains the stock vehicle suspension geometry, payload rating and ride quality. All of the suspension lift system components are constructed of high quality materials here in the USA and are powder coated for durability and corrosion resistance.

With this lift kit, 315/75/16 (35”) tires can be fitted with the following conditions met:

  • Removal of the front mudflaps
  • Slight trimming of the rear of the front fender
  • Trimming of the front bumper and front inner fender well liner.
  • Minimum of a 9/16” (14mm) wheel spacer be installed on factory steel wheels with 54mm of offset or any other wheel that has comparable offset. This is for tire clearance between the inside of the tire and the strut and rear inner fender.
  • Note; this could be omitted with an additional 9/16” (14mm) offset and aftermarket wheels.
  • 2019+ vans with adaptive cruise control are limited to 275/70/17 sized tires


INCLUDED COMPONENTS:

  • Front 2.0” strut spacer - 1/4” hot rolled steel
  • Front 2.0” subframe drop spacers - 4140 heat treated chromoly
  • Motor mount 2.0” lift spacer - 3/16" hot rolled steel
  • Transmission 2.0" lift spacer - 3/16" hot rolled steel
  • Steering shaft extension - 4140 heat treated chromoly
  • Low pressure power steering hose extension
  • Front brake line relocation brackets
  • Rear 5 leaf mini spring pack
  • Rear sway bar links - 11/16" x .120 DOM and 3/16" hot rolled steel
  • Rear lower shock mounts - 1/8" hot rolled steel
  • Rear bump stop drop brackets - 1/8" hot rolled steel
  • Rear ride height headlight adjustment extension bracket - 1/8" hot rolled steel
  • All necessary hardware
  • Front Falcon 2.315" piggy back 3.3 fast adjust shocks and mounting brackets
  • Front Sumo Springs
  • Rear Falcon 2.315" piggy back SP2 3.3 fast adjust shocks

 

NOTE - Some 2019+ Vans with rear A/C are not compatible with our front shock mounts. Please look in the passenger wheel well for a/c lines under the plastic fender liner. 

0 stars based on 0 reviews
Please accept cookies to help us improve this website Is this OK? Yes No More on cookies »