TWIN MONOTUBE PROJECT 10-45mm ADJUSTABLE COIL-OVER BODY LIFT / SUSPENSION KIT complete VW T5, T6 AND T6.1 WITHOUT DCC

€2.277,50
Article number: TMP-GF-LIFT-1

TWIN MONOTUBE PROJECT 10-45mm ADJUSTABLE COIL-OVER BODY LIFT / SUSPENSION KIT complete VW T5, T6 AND T6.1 WITHOUT DCC

Suitable for 2WD and 4motion. Lift your van as desired by 10 to 45 mm.

Please choose the right variant! If there is any doubt, please contact us!

The differential lowering kit can optionally be ordered for 4motion (TMP-DIFF)

Precisely adjust the height as desired with this coil over thread body lift kit for FRONT + REAR with millimeter precision, regardless of whether it is a fully equipped California, Multivan, complete conversion, long or short wheelbase, plus maximum comfort plus compression adjustment, plus even more rebound travel - more is not possible!

In the past, the problem has been that with all conventional body lift kits, due to the different equipment (DSG / manual transmission, pop-up roof, extensions, rear racks, etc.) and wheelbases, no precise prognosis of the lift is possible in advance.

This is the end of this with this lift kit!

If, for example, the idea is that the vehicle should reach an exact height of 490mm at the front and rear (measurement from the center of the wheel to the edge of the fender), this can be set to the exact millimeter front and rear, right and left with this chassis!

The special XL - long KONI-ADJUST-SENSITIV-AT coilover struts offer a stepless height and compression adjustment at the front from the outside (above) with the handwheel supplied! The rear shocks also have a stepless external height adjustment and are also adjustable in compression rate when removed.

Furthermore, they are, by the way, even longer and more comfortable than the Bilstein dampers and based on the successful Twin-adjust-Projekt-sensitive coilover kits!

Maximum comfort, sensitive lift which also has a very pleasant effect on long distance trips and everyday life. Plus even a longer decompression travel (XL length) to offer not only a better impact acceptance off the raod, as well as the possibility of rebound hardness adjustment.

Of course, the springs were again perfectly designed and adjusted by the engineers at Eibach Germany. And of course produced at Eibach Germany with the best possible setting strength, breaking strength and durability worldwide! The maximum that is technically possible!

A new benchmark in terms of lift, comfort and off-road performance. With production at Eibach Germany and KONI, durability and settling strength are guaranteed. In vehicles with DCC, the DCC must be properly shut down after the shock absorber has been replaced.

The adjustment range of the elevating threaded chassis is approx. +10 to + 45mm and in the report limited to a stand height of max. 490mm, whereby there is still more margin in the thread.

Please choose the right variant! If there is any doubt, please contact us!

1) For Multivan, Transporter, Caravelle (WITHOUT: CALIFORNIA, HEAVY DUTIES)

a) with clamp fastening on the front axle:

Item number: TMP-GF-LIFT-1

b) T32 with clamp attachment to the front axle:

Item number: TMP-GF-LIFT-2-T32

2) For California or models with heavy extensions / shelves / etc which also have an empty weight of at least 1000kg rear axle

a) with clamp fastening on the front axle:

Item number: TMP-GF-LIFT-3

b) T32 / with clamp attachment on the front axle:

Item number: TMP-GF-LIFT-4-T32

 

Including German TÜV parts certificate in German and English

The manufacturer only gives a guarantee on this lift kit if it is installed in our workshop. Installation by a third party will void any warranty.

0 stars based on 0 reviews
Please accept cookies to help us improve this website Is this OK? Yes No More on cookies »